3.0 Installation
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment and place the
cover of the camera within 4 hours of removing it.
1.
2. Route and connect the cables.
3. Secure the mounting base with camera to the wall with the screws provided.
4. Bracket adjustment. Before adjustment, preview the image of the camera on a monitor
9
Drill the screw holes and the cable hole (if you want to route through the ceiling) on the
wall or ceiling according to the drill template.
and then loosen the fixed screws to adjust the view angle of the camera. After, tighten
the fixed screws.
Fixed Screws
90° Tilt
360° Rotation
Mounting Base
360° Pan