Car Find Function - Mazda BCKA V7 620 User Instructions

8-6. Car find function

If this operation is carried out when the engine is stopped or after the engine
has been started by remote control, the vehicle's hazard warning lights will
flash twice and the horn will sound twice.
Operation
Press F switch
Press F switch while
LED light (green) is
flashing (approx. 3
seconds)
 Press switches until sound is heard.
 Release F switch when beep sound
Note
When the hazard warning switch has already been pressed to flash the hazard
warning lights, the flashing of the hazard warning lights using the car find function
does not operate (operation using the hazard warning switch takes precedence).
Even in such cases, the remote controller notifies the user that communication
with the vehicle was completed using the same display as indicated above and
the beep sound.
Press START switch
while LED light (green)
is flashing (approx.
3 seconds)
is heard
19
Indication
LED light color
Car find operates
Green
Car find does
not operate* or
Red
Communication
error
*Radio signal from remote
controller not received.
Operate in reception
range.