Checking Packed Components; Handling Precautions - Fujitsu F2MC-16LX Operation Manual

1. Checking packed components

Before using the MB2132-466, make sure the following components have been provided.
• • • •
MB2132-466 (LQFP-48P Probe Cable): 1
• • • •
Screws for securing probe header (M2 x 14 mm with washer): 4
• • • •
NQPACK048SD (Compatible socket manufactured by Tokyo Eletech Corporation): 1
• • • •
HQPACK048SD (Socket cover for mounting MCU manufactured by Tokyo Eletech
Corporation): 1
• • • •
Operation manual (Japanese version): 1
• • • •
Operation manual (English version, this manual): 1

2. Handling Precautions

The MB2132-466 (LQFP-48P probe cable <NQPACK version>, hereafter called the probe cable) , is
precision-manufactured to improve dimensional accuracy and to ensure reliable contact. The probe
cable is therefore sensitive to mechanical shock. To ensure correct use of the probe cable in the
proper environment, observe the following points regarding its insertion and removal:
• • • •
To connect the probe cable to a user system, insert the probe header into the NQPACK
mounted on the user system board by aligning the first pin (L) of the NQPACK with the
first pin of the probe header ( ) as shown in Figure 2-1. Secure the header with four of
the screws. Do not overtighten the screws.
2
First pin
First pin
Figure 2-1 Probe cable connection
4 screws for securing the probe header
User system board
Reinforcing board
YQPACK048SD
NQPACK048SD