Fujitsu F2MC-16LX Operation Manual page 3

Lqfp-48p probe cable (nqpack version)

Hide thumbs Also See for F2MC-16LX:

PREFACE

Thank you for purchasing the MB2132-466 (LQFP-48P

The MB2132-466 probe cable is used to connect an emulator for F

This manual explains the handling and operation of the MB2132-466 (LQFP-48P probe cable

<NQPACK version>). Read this manual carefully before using the MB2132-466.

*1: The applicable package is the FPT-48P-M05 (lead pitch: 0.5 mm, body size: 7 x 7 mm).

*2: F

MC is the abbreviation of FUJITSU Flexible Microcontroller.

• The contents of this document are subject to change without notice. Customers are advised to consult

with FUJITSU sales representatives before ordering.

• The information and circuit diagrams in this document are presented as examples of semiconductor

device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU

is unable to assume responsibility for infringement of any patent rights or other rights of third parties

arising from the use of this information or circuit diagrams.

• The products described in this document are designed, developed and manufactured as contemplated

for general use, including without limitation, ordinary industrial use, general office use, personal use,

and household use, but are not designed, developed and manufactured as contemplated (1) for use

accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious

effect to the public, and could lead directly to death, personal injury, severe physical damage or other

loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass

transport control, medical life support system, missile launch control in weapon system), or (2) for use

requiring extremely high reliability (i.e., submersible repeater and artificial satellite).

Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages

arising in connection with above-mentioned uses of the products.

• Any semiconductor devices have an inherent chance of failure. You must protect against injury,

damage or loss from such failures by incorporating safety design measures into your facility and

equipment such as redundancy, fire protection, and prevention of over-current levels and other

abnormal operating conditions.

• If any products described in this document represent goods or technologies subject to certain

restrictions on export under the Foreign Exchange and Foreign Trade Law of Japan, the prior

authorization by Japanese government will be required for export of those products from Japan.

(*1)

probe cable <NQPACK version>).

(*2)

-16LX to a user system.