Renault ESPASE 2005 Manual page 79

EXTERIOR LIGHTING AND SIGNALS
1
2
Side lights
Turn the end of switch 1
until the symbol is opposite mark 3.
The instrument panel lights up, the
brightness can be adjusted by using
control knob 2.
1.70
1
Dipped beam headlights
u
Automatic operation
With the engine running, the dipped
beam headlights are switched on or
off automatically depending on the
level of ambient light, without the
need to use stalk 1 (position 0).
This function can be deactivated or
reactivated.
- To deactivate it, with the ignition
switched on and engine stopped,
turn stalk 1 twice consecutively
from position 0 to side lights. This
action is confirmed by a beep.
3
k
Automatic operation (continued)
- To activate, with the ignition
switched on
and the
stopped or running, turn stalk 1
twice consecutively from position
0 to side lights. This action is
confirmed by a beep.
- To go to the main beam headlight
position, pull stalk 1 towards you.
To return to the dipped beam
headlight position, pull the stalk
towards you again.
- The lights go out when the engine
is stopped, when the driver's door
is opened or when the vehicle is
locked with the RENAULT card.
Manual operation
Turn the end of stalk 1 until the
symbol faces mark 3.
An indicator light lights up on the
instrument panel in all cases.
engine