Renault ESPASE 2005 Manual page 180

REAR SEAT FUNCTIONS
B
Third example: all the seats are
taken out.
Fourth example: the seats are in
storage position.
Move front seat 1 forward. Fit seat 2,
with its seatback pulled down, onto
rails A, and move it forward as far as
possible.
(continued)
1
A
Then fit seat 3, with its seatback
pulled down, and move it forward
as far as possible; next, fit the rear-
facing seat 4, with its seatback
pulled down, onto rails B then
position it as far back into the
vehicle as possible and push back
seats 3 then 2 then front seat 1.
2
3
4
Special case: seats mounted in the
rear-facing position
The rear-facing
position should only be
used when the vehicle is
stationary.
seat
3.49