Related Manuals for Daikin FHA50BVMA
Summary of Contents for Daikin FHA50BVMA
- Page 1 OPERATION MANUAL SPLIT SYSTEM Air Conditioners MODELS (Ceiling Suspended type) FHA50BVMA FHA50BVMV FHA50BAVMA FHA60BVMA FHA60BVMV FHA60BAVMA FHA71BVMA FHA71BVMV FHA85BVMA FHA100BVMV FHA100BVMA FHA125BVMA FHA140BVMA...
- Page 3 Thank you for purchasing this product unit. Carefully read this operation manual to ensure proper operation. After reading the manual, file it away for future reference. Furthermore, make certain that this operation manual is handed to a new user when he takes over the operation.
-
Page 4: Table Of Contents
CONTENTS The appliance is not intended for use by unattended young children or persons who are 1. SAFETY PRECAUTIONS....... 1 incompetent to operate air conditioners. 2. WHAT TO DO BEFORE OPERATION... 4 It may result in injury or electric shocks. 3. - Page 5 WARNING Do not place flammable sprays near the unit as this can cause explosions. Do not use means to accelerate the defrosting Do not clean the air conditioner with organic process or to clean, other than those solvents such as paint thinner. recommended by the manufacturer.
- Page 6 Do not place water containers (flower vases, Consult your local dealer regarding etc.) on the indoor unit, as this may result in relocation and reinstallation of the air electric shocks or a fire. conditioner. Improper installation work may result in leakage, Do not put flammable containers, such as electric shocks or a fire.
-
Page 7: What To Do Before Operation
Do not remove the outdoor unit’s outlet side Ensure that the remote controller is not exposed grille. to direct sunlight. The grille protects against the unit’s high speed This will cause discoloration of the LCD display with fan, which may cause injury. resulting loss of readability. -
Page 8: Operation Range
When using a wireless remote controller, refer to the Air outlet operation manual attached to the wireless remote Horizontal blade (at air outlet) controller kit. Suction grille If your installation has a customized control system, (Refer to “8. MAINTENANCE” on page 9.) ask your local dealer for the operation that Air filter (inside suction grille) corresponds to your system. -
Page 9: Installation Site
Filled with much mineral oil such as cutting oil System relocation b. Where there is much salt such as a beach area c. Where sulfured gas exists such as a hot-spring • Consult your Daikin dealer about remodelling resort and relocation. d. Where there are considerable voltage fluctuations such as a factory or plant e. - Page 11 MOVEMENT OF THE HORIZONTAL BLADE AIRFLOW DIRECTION ADJUST For the following conditions, micro computer controls the airflow direction so it may be different • There are 2 ways of adjusting the airflow direction. from the display. (When the operation stops, the horizontal blades •...
-
Page 12: Optimum Operation
B. LEFT AND RIGHT DIRECTION • Turn off the power circuit breaker when it is not in use for a long period. When the power circuit • The left and right airflow direction can be fixed at breaker is turned on, small amount of power is the desired position manually. - Page 13 1. Open the suction grille. CAUTION Slide the knob to the arrow direction and slowly • Do not wash the air conditioner with water. open the grille. (The other grille is similar.) It may cause electric shocks or a fire due to leakage.
- Page 14 2 Keep holding the clips at the upper part of the NOTE suction grille and pull them to frontward. • Do not wash the air filter with water of 50°C or higher. It may cause decolorization and (The other grille is similar.) deformation.
- Page 15 7. Close the suction grille. HEATING OPERATION within 6 hours after the power is supplied to the air conditioner. Slide all the knobs in the reverse order • Some models perform the following operation to mentioned in the Clause 1 and securely fix them. protect the devices.
- Page 19 • Check if the ventilation fan is in operation. • If a safety device such as a fuse, a power circuit breaker or an earth leakage breaker frequently • Check if direct sunlight enters the room (when actuates; cooling). Measure: Do not turn on the main power switch. Use curtains or blinds.
- Page 20 The two-dimensional bar code is a manufacturing code. 3P400449-3U M16N034C (2110) HT...