Table of Contents
Advertisement
System Setup
System Setup (Continued):
2. A. The SYS (system) buttons deactivate and
activate system features.
B. The Effect buttons changes the way the
unit transitions from one screen to another
screen.
3. Once selections have been made press the
button to exit the system setup menu.
Calibration Setup:
1. Press the
button to reveal more setup features.
2. Select the Calibration icon to enter the screen
calibration setup interface.
3. Press the
button.
4. Enter "5365" for the password then press the
button.
5. Touch the center of the following buttons:
,
,
,
,
the screen, the unit saves your settings and
exits automatically.
Logo Setup:
No user selectable function.
Audio Setup:
See "Sound Controls" section of this manual for
more information.
Wallpaper Setup (Background Image):
1. Press the
button to reveal more setup features.
2. Select the Wallpaper icon to enter the wallpa-
per selection interface.
3. Either select a file pre-stored in the system or
select Scan SD and select an image from the
rear SD GPS Card holder.
4. Touch
to save the image and the unit will
automatically return to the main interface.
Note: Please use 800dpi*400dpi & 24-bit/channel
BMP format file as Wallpaper if desired.
8
(Continued)
in sequence. After calibrating
Hide quick links:
Advertisement
Table of Contents
