Magnadyne M4-LCD Operation And Installation Manual page 41

Satellite Radio Operation
Programming Preset Satellite Channel:
1. Tune in the desired channel then press the
PRESET button to access the preset channel
menu.
2. To program the channel, press and hold any
one of the six channel recall buttons until
you see the "Preset Number" appear in the
display. The channel will now be displayed on
the preset button.
3. To program additional channels, tune them in
using the CH- (lower channel) or CH+ (higher
channel) button. Press and hold any of the
other five channel recall buttons until you see
the "Preset Number" appear in the display.
The channel will now be displayed on the
preset button.
4. Additional channels can also be programmed
in the different preset bands (SIR1, SIR2 and
SIR 3). Press the SIR BAND button to access
the different preset bands. Press
to the main satellite radio screen.
Note: Each band can program 6 channels, so
18 satellite channels can be programmed in
the radio's memory.
Recalling Preset Channel:
1. Press the PRESET button to access the Preset
Channel menu.
(Continued)
Hold
Sirius Band
to return
Preset Number
41