Table of Contents
Advertisement
ENGLISH
Display
Residual heat indicator
Warning!
burns from residual heat.
The indicators show the level of the residual
heat for the cooking zones you are currently
using. The indicators may also come on for
Daily use
Switching on / off
Touch
for 1 second to switch the
appliance on / off.
Automatic Switch Off
The function switches off the appliance
automatically if:
• all cooking zones are deactivated.
• you do not set the power setting after
switching on the appliance.
• you cover any symbol with an object (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
• you do not deactivate a cooking zone
after a certain time, or you do not modify
the power setting, or if overheating
occurs (e.g. when a pan boils dry). The
symbol
lights up. Before using again,
you must set the cooking zone to
Power setting
-
-
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
There is a risk of
Automatic switch off
after
6 hours
5 hours
4 hours
Description
the neighbouring cooking zones even if you
are not using them.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
Power setting
If cookware that is not suitable is
used,
and after 2 minutes the indicator
for the cooking zone deactivates.
Adjusting the power setting
To set the cooking zone touch the sensor
field
related to this zone. The display
highlights the heat setting indication (
Touch
Touch
Touch
.
deactivate the cooking zone.
Lock / Cleaning mode
You can lock the control panel and keep the
cooking zones operating. It prevents an
accidental change of the power setting.
Use the function to clean the
surface of the hob during the
cooking session, if needed.
Automatic switch off
-
lights up on the display
to increase the heat setting.
to decrease the heat setting.
and
at the same time to
12
after
1.5 hours
).
Advertisement
Table of Contents
