Remove The Wiring Harness From The Old Micro-Switch And Re-Attach It To The Replacement Switch In The Same Manner; 13． Maintenance For Other Components; Repair And Maintenance For The Brake Light Panel; On Both Sides Of The Plate Lamp Maintenance - Sega Transformers Human Alliance Owner's Manual

12-3 Remove the wiring harness from the old micro-switch and re-attach
it to the replacement switch in the same manner.
Clip the micro-switch back into the lamp house, and make sure that it is in the right place,
and then fasten the screw.
13． MAINTENANCE FOR OTHER COMPONENTS

13-1 Repair and maintenance for the brake light panel.

1 Unscrew the screws (arrow) with 2.5mm hexagonal key.
2
Disassemble the lamp panel, replace the bad

13-2 On both sides of the plate lamp maintenance

1 Unscrew the screws(arrow) with 3mm hexagonal key.
any skid may lead to damage
5PCS M4*12
LCD
lamp bead after power-on test.
when disassembling
http://op.sega.jp/op_e/
The brake light panel
(left and right).
45