Controller Calibration Setting - Sega Transformers Human Alliance Owner's Manual

SWIPE CARD TO
PLAY
CAMPAIGN

10-7 CONTROLLER CALIBRATION SETTING

Check and calibrate the controllers' crosshair positions.
CONTROLLER CALIBRATION SETTING screen
■Control
- Use the SERVICE Button to move the cursor to the desired test item.
- Press the TEST Button to confirm selection of the item.
- Select EXIT and press the TEST Button to return to the GAME TEST MODE screen.
■Check Method
Red crosshair will change position according to player1 (left side) controller rotation. Blue
crosshair will change position according to player2 (right side) controller rotation. The
centers of the 2 crossing lines are the center position of each player's crosshair.
When the controller moves to the extreme position of top left, top right, bottom left and
bottom right, if the corresponding crosshair position will be in the very corner of top left,
top right, bottom left and bottom right, the crosshair is functional. Otherwise, manual
38
Change the text at the screen bottom.
If the setting is set to "ON", "SWIPE CARD TO PLAY" will be shown
at the screen bottom. If the setting is set to "OFF", "INSERT
COIN(S)"/"INSERT MORE COIN(S)" will be shown at the screen
bottom as usual. "OFF" is set by default.
Set if the campaign will be open. If the setting is "ON", the promotion
will be displayed after the game is clear. "ON" is set by default.
http://op.sega.jp/op_e/