Adjust The Quantity Of Froth; Making Cappuccino And Milk-Based Coffees Automatically; Cleaning The Milk Containerafter Every Use; Programming And Selecting - DeLonghi Eletta Evo ECAM4686X Instructions For Use Manual

8.2 Adjust the quantity of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees.
Dial Description
position
No froth
Min. froth
Max. froth
8.3 Making cappuccino and milk-based coffees
automatically
1. Fill the milk container (D) and attach it as described above;
2. Select the required beverage:
Directly selected beverages:
• : Hot milk (B4)
• : Latte (B5)
• : Cappuccino (B6)
Selectable by pressing
with (B11):
• Latte Macchiato
• Flat white
• Cappuccino Mix
3. After a few seconds, preparation begins automatically and
the selected beverage appears on the display (B1), togeth-
er with a progress bar which gradually fills as preparation
progresses;
4. After delivering the milk, the machine automatically
makes the coffee (if required by the recipe).
Please note:
• (B2): press to interrupt preparation completely and
go back to the main screen.
• "STOP" (B3): to interrupt milk or coffee delivery and
move on to the next delivery (if applicable) to complete
the beverage.
• At the end of delivery, to increase the quantity of coffee in
the cup, press the button corresponding to "EXTRA" -
(B10).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
• The beverages can be customised (see section "9. Pro-
gramming and selecting").
Recommended for...
HOT MILK (not frothed) /
LATTE
LATTE MACCHIATO/
FLAT WHITE
CAPPUCCINO/CAPPUCCINO
MIX / HOT MILK (frothed)
(B10) and confirming

8.4 Cleaning the milk containerafter every use

The milk frother lid must be cleaned each time you use a milk
function:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout;
3. Turn the froth adjustment dial (D1) to "CLEAN" (fig. 17). A
progress bar appears and gradually fills as the operation
proceeds together with "Cleaning underway". Cleaning
stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A10) with a sponge (fig. 18).
Please note:
• If you want to prepare a number of cappuccinos or milk-
based coffees, clean the milk container after you have pre-
pared the last beverage only. In this case, when requested,
press (B2) to go back to the main menu.
• If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.

9. PROGRAMMING AND SELECTING

In the " my" menu you can customise the beverages according
to your personal tastes.
1. Press (B3);
2. Press the scrolling arrows
the required beverage is displayed;
3. Press (B11) to select the beverage;
• Beverages with coffee: "Program strength" appears
4.
on the display (B1). Press the scrolling arrows
or until the required strength is selected. Press
to confirm the selection. Preparation begins and
"Program coffee" appears on the display together with
a bar which gradually fills as delivery progresses. When
13
17
symbol ap-
(B3) or
18
(B10)until