Testing DECT encryption
When this function is enabled, the handset tests whether the DECT connection to the base is
secure, i.e. is encrypted. If not, a message is shown on the display.
Settings
Change (
= enabled)
If a repeater without encryption is used, the secure connection test must be disabled.
If, on the base, encryption is disabled at a later time whilst the secure connection test is enabled
(because a repeater needs to be connected for example), Press 'info' to read security info is
shown on the handset.
Info . . . the situation is explained
During a call
A sound and a message on the display indicate when encryption is disabled on the base during
a call.
Continue call:
Stop call:
If neither is pressed, the call is stopped automatically after a certain time.
Testing the secure connection status during a call:
Press the Hash key
display
Resetting a handset
Reset any individual settings and changes that you have made.
Settings
the handset's settings are reset
The following settings are not affected by a reset
•
Registration of the handset to the base station
•
Date and time
•
Directory entries and call lists
•
SMS lists
OK
System
Sec. off . . . the secure connection test is disabled
Yes
No
for a longer time . . . the secure connection status is shown on the
OK
System
OK
Security Check
OK
Handset Reset
Handset
OK
Yes . . .
65