Table of Contents
Advertisement
Baby monitor
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The microphone of the handsfree device is always used, even if a headset is connected.
The answer machine for the destination number must be switched off.
After switching on:
Test sensitivity.
Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the baby monitor
Additional Features
Monitor
OK . . . then
Switch on/off:
Activation:
Enter destination:
Send alarm to
External:
number from the directory:
Internal:
handset
OK
Activate/deactivate two-way talk:
Two Way Talk
Set microphone sensitivity:
Sensitivity
Save settings:
Save
The destination number is displayed in idle display when the baby monitor is activated.
Deactivate baby monitor / Cancel alarm
Deactivate the baby monitor:
Cancel the alarm:
46
OK
select On or Off
select External or Internal
Number
select number or select a
Handset
Change
select On or Off
select High or Low
In idle status press the display key OFF
Press the End call key
Baby Monitor activated
Baby
INT 1
select the
OFF
during an alarm
07:15
14
Oct
Baby Monitor
0891234567
Options
Advertisement
Table of Contents
