Table of Contents
Advertisement
Handset
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
Press the display key Time
or, if the date and time have already been set:
Settings
The active input position flashes.
Change input position:
To switch between the entry fields:
Enter date:
enter the day, month and year in 8-digit format.
Enter time:
enter hours and minutes in 4-digit format.
Save settings:
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
Press and hold the End call key
The telephone is now ready for use.
Connecting the headset
Use the 3.5 mm jack to connect the headset to the left-hand side of
the handset
.
1
The headset volume corresponds to the setting for the receiver
volume.
12
OK
Date/Time
OK
Calls
Time
Date/Time
Date:
15.08.2022
Time:
00:00
Back
Save
1
Advertisement
Table of Contents
