Craftsman CMCCSL621 Instruction Manual page 5

Usage (Fig. A, B)
1. Carry out regular cleaning of the unit as described in the
Maintenance section and in particular cleaning inside
the chain access cover.
2. The lower guard jaw
Fig. H
designed to close when one of the handles is released
or when the piece of branch being cut has been cut.
If this does not occur, discontinue use of the tool and
remove the battery pack. Check if any debris is blocking
15
movement. To help in this process it may be necessary
us personal
to remove chain access cover
attery pack
problem is still present take the unit to a service center.
moving/
Proper Hand Position (Fig. H)
An

WARNING: To reduce the risk of serious personal injury,
at is
ALWAYS use proper hand position as shown.

s not
WARNING: To reduce the risk of serious personal injury,
re that the
ALWAYS hold securely in anticipation of a sudden
control
reaction.
the guide
A chain saw is intended for two-handed use. Serious injury
ating.
to the operator, helpers, and/or bystanders can result from
ace. Do
one-handed operation.
Fig. H
ery Pack
Fig. J
pack is
e, align the
le and slide
seated in
the release
of the tool
Oiling (Fig. I)
the charger

WARNING: A high quality bar and chain oil or SAE30
weight motor oil should be used for chain and bar
lubrication. The use of a vegetable based bar and
chain oil is recommended when pruning trees. Never
use waste oil or very thick oil. These may damage your
Fig. L
chain saw.
5
2 and top chain cover jaw
13 15 13
12 . If on assembly the
1 are
Fig. I
16
Fig. K
Fig. M
6
17
3