Table of Contents
Advertisement
3.2 Methods
The following explanation is about supported/unsupported Methods, and the
detailed information.
Method
PrintNormal
PrintTwoNormal
PrintImmediate
PrintBarCode
PrintBitmap
PrintMemoryBitmap
CutPaper
MarkFeed
ChangePrintSide
ValidateData
TransactionPrint
SetLogo
SetBitmap
RotatePrint
EndRemoval
BeginRemoval
EndInsertion
BeginInsertion
ClearPrintArea
PageModePrint
DrawRuledLine
O
: Supported
X : Unsupported
*1
Full cut (completely cut) is possible as a dealer option.
*2
If the specified Station is ready to print, the printing data shall not be stored in the
PageMode printing buffer but, instead, go straight to printing. If the Station is not ready
to print, an error is returned.
*3
If other than "LEFT" is specified for the printing position of barcode, the printing shall be
done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
*4
If other than "LEFT" is specified for the printing position of bitmap, the printing shall be
done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
Supported/
Unsupported
Paper Width =
80.0mm
Paper Width =
58.0mm
Paper Width =
40.0mm and
Default
O (1~100: One point
remains uncut / Full cut
O
O
O
15
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-L90LinerFree)
Version 3.00 Sep. 2019
PageMode printing
Paper Width =
Paper Width =
40.0mm and
80.0mm
Auto Scaling
Paper Width =
mode
58.0mm
Paper Width =
40.0mm and
Default
O
X
O
O
O
O
*1
)
X
X
O
O
O
O
X
X
X
X
X
X
X
X
Paper Width =
40.0mm and
Auto Scaling
mode
O
X
*2
O
*3
O
*4
O
*4
O
X
X
X
O
O
O
O
X
X
X
X
X
O
X
O
X
X
Advertisement
Table of Contents
