Device Settings; Usable Device Specific Settings - Epson TM-L90LinerFree Series Development Manual

2.4 Device Settings

The following explanation is about the settings for TM-L90LinerFree.

2.4.1 Usable Device Specific Settings

For the TM-L90LinerFree, the following device specific settings are settable by
the SetupPOS utility. For the detail, please refer to the Section 2 of "EPSON
OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM
Series)".
Tab
General
Bitmap
Color Bitmap
Status Log
Default Value
Options
Paper
*1
The settings can be changed when using a connection other than serial.
*2
Available only for the Multilingual character model.
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
Ignore firmware version check
Output complete timeout
TMFlogo...
Halftone: Method
Halftone: Brightness
Color: Primary
ERROR
OFFLINE
Log file name (include full path)
Maximum file size [KB]
*2
Multilingual font
44 characters per line
42 characters per line
30 characters per line
Auto Scaling mode
Default
Paper Type
Paper Width [mm]: LineWidth [dot]
6
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-L90LinerFree)
Version 3.00 Sep. 2019
Settings
*1