Electronic Logo Function (Nvram) - Epson TM-H6000III Series Development Manual

3.8 Electronic Logo Function (NVRAM)

TM-H6000III feature an electronic logo function (NVRAM). There are two ways of
using NVRAM explained as follows:
1. Using TMFlogo Utility
Start up TMFlogo utility from "Device Specific Settings" dialog box of SetupPOS
utility, and register image files (BMP style) with NVRAM in advance. For the
details of the registration, please refer to the "Help" of "TMFlogo utility" and/ or
"EPSON OPOS ADK MANUAL User's Manual TMFlogo Utility".
To print image files registered with NVRAM, please use the either of the
following DirectIO:
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2
Please refer to the Section 4 of "EPSON OPOS ADK MANUAL APPLICATION
DEVELOPMENT GUIDE POSPrinter (TM Series)" for detail.
2. Using SetBitmap Method
Checking "NVRAM" check box on "Bitmap" tab in "Device Specific Settings"
dialog box of SetupPOS utility enable to register image files with NVRAM using
SetBitmap method.
Regarding the details of image files registration with NVRAM using SetBitmap
method, please refer to the Section 8 of "EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)"
The available size of NVRAM are as follows:
TM-H6000III
TM-H6000IIIM
393216 bytes
393216 bytes
18
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
Version 3.00 Feb. 2019