Electronic Logo Function (Nvram); Printable Bitmap Types And Sizes - Epson TM-L90 Series Development Manual

3.12 Electronic Logo Function (NVRAM)

The TM-L90 models feature a function for electronic logo. To use the electronic
logo function (NVRAM), start "TMFlogo utility" from the "Device Specific Settings"
of SetupPOS utility, and register image files (BMP style) at the function in
advance.
"TMFlogo utility" and/or "EPSON OPOS ADK MANUAL User's Manual TMFlogo
Utility"
To print the registered image file, please use the following DirectIO.
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2
For the details of the printing, please refer to Section 4 of "EPSON OPOS ADK
APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)".
available NVRAM size for the TM-L90 is 393216 bytes.

3.13 Printable Bitmap Types and Sizes

The TM-L90 models support the following bitmap commands. For the detail,
please refer to the Section 3 of "EPSON OPOS ADK MANUAL APPLICATION
DEVELOPMENT GUIDE POSPrinter (TM Series)". The allowance ranges for
bitmaps are as follows.
Bitmap command type
Download bitmap
Raster bitmap
Even if meet with the limitation described above, a bitmap that extend the
paper width cannot be printed.
When a height of the raster bitmap expands the value described above, the
SO (Service Object) will automatically separate the bitmap data into multiple
bitmaps, then print the multiple bitmaps data as one connected bitmap.
For the details of the registration, please refer to the "Help" of
x (x x 8 dots)
1~2040
1~1024
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-L90)
Allowance range
y (y x 8 dots)
1~384
1~831
25
Version 3.00 Feb. 2019
xy
Receipt:
<= 98304
The