Radio Shack 43-931 Owner's Manual page 16

43-931.fm Page 16 Monday, August 16, 1999 2:49 PM
Attaching the Mounting Bracket
1. Align the keyhole slots on the bottom of the system with
the hooks on the mounting bracket.
2. Gently push the system down on the bracket to secure it.
If you are placing the system on a desk, shelf, or table, pull out
the stand on the back of the bracket until it clicks.
To remove the system from the bracket, press up from the bot-
tom of the system until it snaps off the bracket.
Mounting on a Wall
To mount the system on the wall, you need two screws (not
supplied) with heads larger than the keyhole slots on the back
of the mounting bracket.
Follow these steps to mount the system on a wall.
1. Using the keyholes in the supplied mounting bracket as a
template, mark the mounting screw locations on the wall.
2. Drill a hole in the wall at each marked location.
16
(illus)