Transactions - Ingenico iWL 25 Wireless Series User Manual

Terminal User Guide

Transactions

In order to perform a transaction in a quick and efficient manner you may type in
the transaction amount from the idle screen, insert the card to the card reader or
press menu key and select sale option. This method may be used to start any sale
transaction, regardless of card type is (i.e. contactless cards or cards with, or
without, a chip).
Enter the transaction amount while the idle screen is being displayed by typing in
the amount in pence (i.e. for £12.34) followed by the green key. If you make
1234
a mistake when entering the amount, you can correct this by using the correction
keys. Press the yellow key once to delete one character at a time. Press the red
key to cancel the amount entry and return to the idle screen.
Contactless card transactions are performed by this method and when the
transaction value is under the contactless card limit (e.g. £30.00). Your terminal will
only prompt for a card to be presented when a contactless
transaction is allowed. When a contactless transaction is
allowed your terminal will show a contactless icon on the
screen. The terminal will prompt for contactless card or
contactless device to be presented depending on the
amount.
Contactless transactions that are above a pre-set value
(Floor Limit) may go online/dial for authorisation.
If you consistently sell an item at the same price you can 'recall' the last transaction
amount by pressing the dot key while the idle screen is being displayed. Your
terminal will allow you to confirm if this is the correct amount, and you can continue
with the transaction by pressing the green key.
Alternatively, the traditional method of starting the transaction by swiping or
inserting the card first may be utilised if required.
Page 26 iWL250 User Guide
Copyright© 2019 Ingenico