Performing Transactions - Ingenico Desk5000 Quick Start Manual

Performing Transactions

By default, the terminal will perform Sale transactions.
Start a transaction by pressing any numeric key or the 'OK' button when the terminal is in the
idle screen. When the 'Enter amount' screen is shown, enter the transaction amount and
press the 'OK' button on the keypad or the touch screen.
Corrections can be made with the yellow 'Clear' key.
The transaction can be stopped with the red 'Stop' key.
Idle screen
If another transaction type is required, press the transaction menu button F1 on the touch
screen and select the required transaction type.
Press the F1 key on the screen
15
'Enter amount screen' after
pressing 'OK' or any number on
the keypad
Choose the referred transaction
Enter the transaction amount and
press 'OK' to start the transaction