Table of Contents
Advertisement
WARNING LAMPS AND
INDICATORS
The following warning lamps and
indicators will come on briefly when you
switch the ignition on to confirm that the
system is operational:
•
Airbag
•
ABS
•
Stability control (DSC)
•
Low fuel
•
Brake system
•
Frost
•
ESP off
If a warning or indicator lamp does not
illuminate when the ignition is switched
on, this indicates a malfunction. Have
the system checked by properly trained
technician.
ABS warning lamp
If it illuminates when driving, this
indicates a malfunction. Have
the system checked by a
properly trained technician. You will
continue to have normal braking (without
ABS) but have this checked as soon as
possible.
Airbag warning lamp
If it does not illuminate, if it
stays on or illuminates
intermittently or continuously
while driving, this indicates a malfunction.
Have the system checked by a properly
trained technician.
Instruments
Brake system warning lamp
Reduce your speed gradually. Use
your brakes with great care. Do
not step on the brake pedal abruptly.
If it illuminates when you are driving,
check that the parking brake is not
engaged. If the parking brake is not
engaged, this indicates a malfunction.
Have the system checked by a properly
trained technician immediately.
Direction indicator
indicator bulb. See Changing a bulb
(page
49).
Cruise control indicator
cruise control
Engine warning lamp
you are driving, reduce the speed
of your vehicle immediately.
If it continues to flash, avoid heavy
acceleration or deceleration. The engine
will continue to run but it will have limited
power. Have this checked immediately.
-61-
It illuminates when the parking
brake is engaged.
WARNING
Flashes during operation. A
sudden increase in the rate of
flashing warns of a failed
It will illuminate when you have
set a speed using the cruise
control system. See Using
(page
105).
If it illuminates when the engine
is running, this indicates a
malfunction. If it flashes when
Advertisement
Table of Contents
