Advertisement
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
†
to 10,000 h)
Using Bluetooth OBELISK top3
All functions can also be transferred to the time switch using
the Bluetooth OBELISK top3 memory card (9070130).
IP 40
9070130
Copying OBELISK → TIME SWITCH
This copies the switching program and optionally all time
switch settings (e.g. time format etc.) from the memory card
in the time switch.
Copying TIME SWITCH → OBELISK
This copies all switch programmes and settings from the time
switch to the memory card.
Starting OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
OBELISK
u
u
BLUETOOTH
COPY
COPY TSWI
OBELISK ->
-> OBELISK
TSWI
COPY ALL
DATA
COPY
PROGRAM
END
Connecting the plug-in time switch, OBELISK top3
Bluetooth and smartphone (via app)
The devices in the top3 range can be programmed using an
app (for Android, iOS) on a mobile end device. Communication
takes place via Bluetooth OBELISK top3. Switch programmes
are transferred and direct switch commands are sent to the
device.
u
u
RUN
CHECK
OBELISK
OBELISK
OVERWRITE
OK
u
L To use the app, you need the OBELISK top3 memory card/
dongle.
Download the OBELISK top3 app from the App Store or
†
Google Play Store
Open the app and activate using one of the 3 commands,
†
by pressing „Download"
„Upload"
▻ Device/device list appears on the display.
Press „Connect".
†
Press OK on the timer.
†
▻ The display shows BLUETOOTH ACTIVE.
Press „Close" in the app within 30 s.
†
u
END
Now, for example, projects can be created and uploaded.
, „Manual command"
or
4
Advertisement
