Advertisement
Change individual switching times
Press MENU.
†
Select PROGRAM and press OK to confirm.
†
Select MODIFY, confirm by pressing OK.
†
Select day, confirm with OK.
†
MODIFY HOUR, use the + or – buttons to change hour and
†
minute and confirm with OK.
To change several switching times, select MODIFY BLOCK,
†
confirm with OK.
Delete switching program
MENU
PROGRAM
NEW
CHECK
MODIFY
DELETE
u
MONDAY
DELETE
BLOCK
L You can either delete a block, i.e. a switching time copied
for several days (e.g. Mon-Fri) or a single switching time
Press MENU.
†
Select PROGRAM and confirm with OK
†
Select DELETE, confirm with OK.
†
INDIVIDUAL is displayed (with u DELETE ALL),
†
confirm with OK.
MONDAY is displayed, confirm with OK.
†
Select DELETE BLOCK, confirm with OK.
†
With u DELETE MONDAY etc. individual days can also be
†
cleared.
Setting holiday function
MENU
MANUAL
PERM ON
PERM OFF
OVERR ON
HOLIDAY
u
RANDOM
HOLIDAY
END
END HOLIDAY
Press MENU.
†
Select MANUAL and press OK to confirm.
†
Select HOLIDAY and press OK to confirm.
†
Select ON and press OK to confirm.
†
Select START HOLIDAY and press OK to confirm.
†
SINGLE
DELETE
u
ALL
DELETE
SINGLE DAY
ON
BEGIN
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm.
†
Select END HOLIDAY and press OK to confirm.
†
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm.
†
Setting the random function
L The consumer is switched on or off at random. If you con-
nect a lamp, you can simulate presence when you are on
holiday and make it more difficult for burglars.
MENU
MANUAL
PERM ON
PERM OFF
OVERR ON
HOLIDAY
u
RANDOM
RANDOM 1
END
Press MENU.
†
Select MANUAL, confirm with OK.
†
Select RANDOM, confirm with OK.
†
Select RANDOM 1 or RANDOM 2, confirm with OK.
†
L Random 1: The channel is switched on and off randomly
during the programmed ON switching times, and remains
completely off during the OFF switching times.
L Random 2: The channel is switched on only 1x and swit-
ched off again 1x during the programmed ON switching
times. However, these ON and OFF switches do not occur
exactly at the programmed times, but are offset by a ran-
dom time.
Setting manual or permanent switching
Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•
Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•
Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
Activating manual control
Briefly press both buttons simultaneously.
†
Activating permanent switching
Press both buttons simultaneously for 2 seconds.
†
Cancelling manual/permanent switching
Press both buttons simultaneously.
†
RANDOM 2
ok
3
Advertisement
