Theben eltimo 020 top3 Manual

Digital plug-in
EN
time switch
theben-eltimo 020 top3
0200130
1. Safety information
To rule out the risk of electrical shock or fire,
protect the time switch from moisture and heat!
Prior to start-up and using the product, read and
observe all the operating instructions.
!
Use a single mains socket (230 V~, 50 Hz, earthed) for the
power supply.
!
Do not plug time switches into each other.
•
The time switches conform to EN 60669-2-1 if correctly
installed and type 1 BSTU in accordance with IEC/
EN 60730-2-7.
•
Power reserve (6 years) is reduced when Bluetooth
OBELISK top3 is connected (in battery mode).
2. Proper use
•
This digital plug-in time switch with weekly program is
suitable for indoor use (floor lamp, aquarium, Christmas
lights, etc.)
•
Interface for Bluetooth OBELISK top3 (+ app)
•
For earthed sockets (plug type F)
•
Only use in dry, enclosed rooms
!
Do not use on safety devices, e.g. escape route doors, fire
safety equipment, etc.
3. Installation and connection
Plug the time switch into a 230 V earthed wall socket and
†
plug the selected device into the socket (F) on the time
switch.
4. Device description
307610
08.02.2022
Digital plug-in time switch
1
2
3
4
Display and buttons
Programmed
switching times
Date display
Channel status
On, Off
MENU

– Activate display
– Open menu
– Cancel menu
– ESC
(leave menu)
Operating instructions
1. Read text line
text/symbol
represents query
2. Make a decision
YES
Confirmation
Press
OK
Display with date, time, week days
1
etc.
4 buttons to operate the device
2
Interface for OBELISK top3 memory
3
card (9070130)
Socket F (and plug on the rear)
4
0 6 12 18 24
Time display
Days of the week
from 1 to 7
Display of the active buttons
with the relevant function
MENU ƒ OK
„
– Save selection
– Confirm selection
  
Options
are displayed
NO
Modify/
Change
Press
t u
OK

1