Table of Contents
Advertisement
Tag-based:
Tag-based VLAN identifies its member by VID. This is quite
different from port-based VLAN. If there are any more rules in
ingress filtering list or egress filtering list, the packet will be
screened with more filtering criteria to determine if it can be
forwarded. The switch supports supplement of 802.1q. For more
details, please see the section VLAN in Chapter 3.
Each tag-based VLAN you built up must be assigned VLAN name
and VLAN ID. Valid VLAN ID is 1-4094. User can create total up to
4094 Tag VLAN groups.
Segment A :
The "Segment A" mode is a special function for LAN Segmentation
(Converter Mode) application, it is working under VLAN function. When
the segment mode enabled, there are max. up to 12 LAN segments on the
switch and fixed two ports for each LAN segment and each LAN segment
will be isolated. The fixed segment ports mapping as below:
Segment
1
2
3
4
5
6
7
8
9
10
11
12
Segment B :
The "Segment B" mode is a special function for LAN Segmentation
(Converter Mode) application, it is working under VLAN function. When
the segment mode enabled, there are max. up to 12 LAN segments on the
switch and fixed two ports for each LAN segment and each LAN segment
will be isolated. The fixed segment ports mapping as below:
Segment
1
2
3
4
5
6
7
8
9
10
11
12
Forwarding Port Mapping
Port 01
Port 09
Port 02
Port 10
Port 03
Port 11
Port 04
Port 12
Port 05
Port 13
Port 06
Port 14
Port 07
Port 15
Port 08
Port 16
Port 17
Port 18
Port 19
Port 20
Port 21
Port 22
Port 23
Port 24
Forwarding Port Mapping
Port 01
Port 02
Port 03
Port 04
Port 05
Port 06
Port 07
Port 08
Port 09
Port 10
Port 11
Port 12
Port 13
Port 14
Port 15
Port 16
Port 17
Port 18
Port 19
Port 20
Port 21
Port 22
Port 23
Port 24
63
Advertisement
Table of Contents
