KTI Networks KGS-2416 User Manual page 164

Normal:
All clients under this port will be authorized when one of the client
do 802.1X authentication successfully.
Advanced:
Each clients under this port have to do 802.1X authentication by
himself.
Clientless:
The clients don't need to install 802.1X client function, that means
the client PC (for example WINDOW XP) does not need to enable
802.1X client function also can do 802.1X authentication. But the
network maintainer need to configure the Radius server using each
client's MAC address for Radius account ID and password.
Port Control:
This is used to set the operation mode of authorization. There are three
type of operation mode supported, ForceUnauthorized, ForceAuthorized,
Auto.
ForceUnauthorized:
The controlled port is forced to hold in the unauthorized state.
ForceAuthorized:
The controlled port is forced to hold in the authorized state.
Auto:
The controlled port is set to be in authorized state or unauthorized
state depends on the result of the authentication exchange between
the authentication server and the supplicant.
Default: Auto
reAuthMax(1-10):
The number of authentication attempt that is permitted before the port
becomes unauthorized.
Default: 2
txPeriod(1-65535 s):
A time period to transmitted EAPOL PDU between the authenticator and
the supplicant.
Default: 30
Quiet Period(0-65535 s):
A period of time during which we will not attempt to access the supplicant.
Deafult: 60 seconds
reAuthEnabled:
Choose whether regular authentication will take place in this port.
Default: ON
160