D16 Specifications - Korg D16 Owner's Manual

D16 specifications
Operating temperature +5 — +40 degrees C (do not allow
range: condensation)
I Specifications
<Recorder section>
Number of tracks: 128 tracks (including virtual tracks)
16 tracks simultaneous playback, 8
tracks simultaneous recording @ 16
bits
8 tracks simultaneous playback, 4
tracks simultaneous recording @ 24
bits
Recording format: 24 bit/16 bit uncompressed, 44.1 kHz
Recording time: 16 bit recording: maximum 6.5 hours
24 bit recording: maximum 3.3 hours
*
When internal 2.1 Gbyte hard disk is used
Maximum storage internal + external 1,000 Gbytes 7
capacity: drives
Number of songs: 100 songs per drive
Locate points: four points per song
Mark points 100 points per song (marks can be
named)
Metronome patterns: 96
Rhythms: 215
MIDI synchronization: transmission (MTC, MIDI CLOCK)
reception (MMC, Scene change)
tempo map (200 points per song)
sync track (one track per song)
Editing: track (Copy, Insert, Erase, Delete,
Swap, Reverse, Optimize, Time
Expansion/Compression {tracks can
be copied between songs})
song (Copy, Move, Delete, Rename,
Protect)
Counter/locate format: Min/Sec/mSec, Meas/Beat/Tick,
Min/Sec/Frame (30NDF only)
<Mixer section>
Structure: 24 channel input, 8 BUS, 1 AUX, 1
MASTER
Signal processing: 32 bit 44.1 kHz
Equalizer: HIGH (f:10 kHz G: 15 dB)
MID (f:0.1 –20 kHz G: 15 dB)
LOW (f:100 Hz G: 15 dB)
Scene memory: 100 scenes per song
<Effect section>
Structure: insert 8 (maximum)
master 2 (maximum)
final 1
All usable simultaneously
Signal processing: 44 bit 44.1 kHz
Programs: insert (128 preset, 128 user)
master (32 preset, 32 user)
final (32 preset, 32 user)
Algorithms: 98
Effects: 106
<General>
Display: 240 64 pixel
LCD with backlight and touch panel
Power supply: AC9V AC/AC power supply
Power consumption: 24 W (AC 9V 2.0A max)
Dimensions: 357mm (W) 245mm (D) 72mm (H)
(Including protrusions)
Weight: 2.0 kg
108
I Principal specifications
Frequency response: 10 Hz –20 kHz 1dB @+4 dBu, 10 k
load
S/N: 100 dB (nominal) @IHF-A
Dynamic range: 100 dB (nominal) @IHF-A
THD+N: 0.02 % (nominal) 20 Hz –20 kHz @+16
dBu, 10 k load
A/D conversion: 24 bit, 64 times oversampling
D/A conversion: 24 bit, 128 times oversampling
Sampling frequency: 44.1 kHz
I Analog/digital input and output specifications
<INPUT1, 2>
Connectors: XLR-3-31 type, 1/4" TRS phone jack
(balanced)
Input impedance: 10 k
Nominal level: –60 dBu @TRIM=max.
: +4 dBu @TRIM=min.
Maximum level: –48 dBu @TRIM=max.
: +16 dBu @TRIM=min.
Source impedance: 600
<INPUT3–8>
Connectors: 1/4" phone jack (unbalanced)
Input impedance: 1 M
Nominal level: –60 dBu @TRIM=max.
: +4 dBu @TRIM=min.
Maximum level: –48 dBu @TRIM=max.
: +16 dBu @TRIM=min.
Source impedance: 600
<GUITAR INPUT>
Connector: 1/4" phone jack (unbalanced)
Input impedance: 1 M
Nominal level: –60 dBu @TRIM=max.
: +4 dBu @TRIM=min.
Maximum level: –48 dBu @TRIM=max.
: +16 dBu @TRIM=min.
Source impedance: 600
<MASTER OUTPUTS L/R>
Connector: RCA phono jack
Output impedance: 150
Nominal level: –10 dBu
Maximum level: +2 dBu
Load impedance: 10 k or more
<MONITOR OUTPUTS L/R>
Connector: RCA phono jack
Output impedance 150
Nominal level: –10 dBu
Maximum level: +2 dBu
Load impedance: 10 k or more
<AUX OUTPUT>
Connector: 1/4" phone jack (unbalanced)
Output impedance: 150
Nominal level: –10 dBu
Maximum level: +2 dBu
Load impedance: 10 k
<PHONES OUTPUTS>
Connector: 1/4" stereo phone jack
Output impedance: 100
Maximum level: 50 mW @32
<S/P DIF INPUT/OUTPUT>
Connector: optical
Format: 24 bit S/P DIF (IEC60958, EIAJ CP–
1201)
or more