Specifications; Precautions - Korg SQ-10 User Manual

4. Specifications

1. VOLTAGE CONTROLLED CLOCK GENERATORSPEED CONTROL [SLOW ~ FAST]
2. SEQUENCE MODE
3. STEP --> (MANUAL)
4. PORTAMENTO
PORTAMENTO CHANNEL (A)
PORTAMENTO CHANNEL (B)
5. TRIGGER DUTY
6. SEQUENCE CONTROL
CHANNEL A
CHANNEL B
CHANNEL C
TRIG OUT
LED
7. SEQUENCE VOLTAGE OUT
( A ) -5V ~ +5V / -1V ~ +1V
( B ) -5V ~ +5V / -1V ~ +1V
( C) 0V ~ +5V
8. MULTIPLE TRIGGER OUT
9. RESET IN
10. EXTERNAL CONTROL
CLOCK SPEED (LINEAR IN ) / 0V ~ +5V
CLOCK SPEED ( x 2-VOLT ) / 0V ~ +5V
CLOCK SPEED ( / 2-VOLT ) / 0V ~ +5V
11. ANALOG MIXERIN 1 + IN 2 = OUT
12. POWER SWITCHPOWER CONSUMPTION / 5.4 WATTS
DIMENSIONS/499 (W) x 170(D) x 249(H)
WEIGHT / 5.1Kgs
ACCESSORIES: PATCH CORD/350mm x 1; 1500mm x 1; 1m x 1

5. Precautions

1. For accurate voltage outputs to be obtained, be sure to let the sequencer warm up for 10 minutes before use.
2. When using the Trigger Out jacks, don't group 4 or more together into one input.
3. When you are not in a manual sequence mode, and the sequencer has been stopped, the LED's will not turn on,
since the sequencer is on standby.
(MULTIPLETRIGGER, CHANNEL C)
( 1 ~ 12 )
( 1 ~ 12 )
( 1 ~ 12 )
( 1 ~ 12 )
( 1 ~ 12 )
8