Mark; P1 Mark: Editing Marks; Scene; P1 Readdel: Scene Playback On/Off And Editing - Korg D12 Owner's Manual

7. MARK

You can register a specific time location in a Mark, and
then jump instantly to that location when desired. Since
you can assign a name to each mark, you can use them
to indicate sections within your song.
A maximum of 100 marks can be registered in each
song.

P1 Mark: Editing marks

1
1. MarkNumber ......................................... [001...100]
Select the mark number. Beside the mark number,
the display shows the name of the mark, and the
registered time location.
Mark numbers are updated in order of their time
location.
2. Rename ..................................................................
Modify the name of the mark.
Select the mark whose name you wish to modify,
select the "Rename" button, press the [ENTER] key
to access the dialog box, and modify the name. You
can input a name of up to sixteen characters.
( p.21)
3. Delete.....................................................................
Delete a mark.
The Undo function is not available after deleting a
mark.
3a. SelectAll............................................... [On, Off]
Select all marks for deletion.
On: All marks will be subject to deletion.
The mark number will be displayed as "***."
Off: The single mark selected by
"MarkNumber" will be selected for deletion.
4. Recall .....................................................................
Recall the mark selected by "MarkNumber," and
move the current time to that location.
92
The mixer settings that you adjust can be registered at a
desired time location as a Scene, and used to automati-
cally change the mixer settings as the song plays (when
Scene Read is turned "On"). Scenes can also be used as
general-purpose settings, and recalled and used when
desired.
Up to 100 scenes can be registered in each song.
The following settings can be registered in a scene.
MixerChannel
Eq, EffectSend1, 2, AuxSend, Pan/Balance, ChFader,
PairOn/Off
2
InsertEffect (only when Assign is "Trk")
3
EffectType, InsertTo, EffectNumber
4
MasterEffect
EffectNumber, EffectReturn
FinalEffect
EffectNumber
Filters are provided for each of these parameter groups,
allowing you to select whether or not they will be regis-
tered or recalled ( "Filter").
P1 ReadDel: Scene playback on/
off and editing
1
2
1. SceneRead .................................................[On, Off]
Turn scene playback on/off.
During playback, each scene will be recalled when
its registered time is reached, and the mixer settings
will change automatically.
When this is "On," the [SCENE] key will light.
3a
You can freely recall scenes as general-purpose set-
tings without regard to their time location. ( p.40
"Recalling a scene")
2. Filter .......................................................................
You can use filters to disable changes for specified
mixer settings (parameters) when registering or
recalling scenes.
Here you can select which mixer settings (parame-
ters) will be disabled.

8. SCENE

4 5 8 3
On: Scene playback is enabled.
Off: Scene playback is disabled.
6
7
9
10