Step 6. Changing The Time Location; Switching The Counter Display; Moving The Current Time Location - Korg D12 Owner's Manual

Step 6. Changing the time location

This section explains how you can move the counter
that shows the current location within the song.

1. Switching the counter display

You can switch the units of the current time shown by
the counter.
1 Select the " " button located at the left of the
counter, and press the [ENTER] key to access the
"Select TimeDisp Type" dialog box.
2 Select the location units that you wish to view,
select the "OK" button and press the [ENTER]
key.
You can select one of the following four types of
display.
• ___.__.___ "measures" . "beats"
• ___:__.___ "minutes" : "seconds" . "1/1000 of a second"
• ___:__.__F "minutes" : "seconds" . "1/30 of a second"
• ___.__ Free "minutes" . "seconds" (remaining available
In order for the "__.__ Free" display to accurately
indicate the remaining time, you must set the
recording track [TRACK STATUS] to REC, and set
the counter display to "FreeTime." When you do
so, the remaining recording time will be displayed
according to the number of tracks that are set to
REC.

2. Moving the current time location

Using the counter to move
1 Select a page in which the counter is displayed in
the upper part of the LCD screen, such as the
[SONG] "SelSong" tab page.
2 Select the portion in the counter that you wish to
change to a new location.
3 Rotate the [VALUE] dial to move the time.
Using the [FF] or [REW] keys to move
Moving backward
Moving forward
Moving to the beginning of the song
Moving to the end of the song
Using the locate keys to move
(LOC1, LOC2, LOC3, LOC4)
You can register specific times in the locate keys, and
jump instantly to those times.
Up to four locate points can be registered for each song.
Use the [IN/LOC1], [OUT/LOC2], [TO/LOC3], and
. "1/96 of a beat"
[END/LOC4] keys.
recording time)
Registering a locate point
1 Move the current time to the location that you
2 Press the [STORE] key to capture the selected
3 Register the time location you captured.
Press the [REW] key to move toward the beginning
of the song. If you hold down the key, you will
move continuously.
You can also move during playback.
Press the [FF] key to move toward the end of the
song. If you hold down the key, you will move con-
tinuously.
You can also move during playback.
When the current time is in the middle of the song,
hold down the [STOP] key and press the [REW]
key to move to the beginning of the song.
When the current time is in the middle of the song,
hold down the [STOP] key and press the [FF] key
to move to the end of the song.
In addition to recalling the locate times that you
register, these keys are also used to specify the time
locations for auto punch recording (IN/OUT
times) and for track editing (the editing region).
For details on the various locate functions, refer to
p.97.
wish to register.
Use the counter ("Counter") or the [FF]/[REW]
keys to change the current time.
time location.
Press one of the [IN/LOC1], [OUT/LOC2], [TO/
LOC3], or [END/LOC4] keys to register the saved
location in that key. The registration will be com-
pleted as soon as you press the key.
Even if you perform steps 2 and following
during playback or recording, the time loca-
tion at the moment you pressed the [STORE]
key will be preserved, and can be registered in
a locate point.
35