Ending Calls; Making Calls; Connectivity Options; Answering Calls - Konftel 300 User Manual

CONNECTIONS

CONNECTIVITY OPTIONS

An analogue phone line is the pre-programmed option, but it is possible to switch between
and combine two connectivity options.

Press the LINE MODE key.

Use the arrow buttons to select a connectivity option and press OK to
confirm your choice.
Options
Connections:
• Analogue telephone line
• GSM/DECT telephone
• Computer (VoIP)
• Analogue telephone line+computer
• Mobile/DECT telephone+computer
Please turn to page 9 for instructions on using the Konftel 300 with a computer and a
GSM/DECT telephone.
Connection to a PC
You can hold group calls over the Internet using VoIP software (e.g. Skype
Konftel 300. The Konftel 300 acts as a loudspeaker and microphone when making VoIP
calls. In stand-by mode , it can also be used to play audio and music. When the
Konftel 300 is in stand-by mode, the display screen shows that the microphone is turned
off.
6
The display screen shows:
ANALOGUE
MOBILE
USB
ANALOGUE+USB
MOBILE+USB
® ) with the
ANSWERING AND MAKING CALLS

ANSWERING CALLS

A ring tone is heard and the blue LEDs start flashing.

Press to answer.
The LEDs show a steady blue light. The duration of the call is shown
on the display screen.

ENDING CALLS


End the call by pressing

MAKING CALLS


Dial the number.

Press .
The number is called and the LEDs show a steady blue light. The dura-
tion of the call is shown on the display screen.
Or:

Press .

Dial the number.
The number is called and the LEDs show a steady blue light. The dura-
tion of the call is shown on the display screen.
Redialling

Press an arrow button.
The last number that you dialled appears on the display screen.

Use the arrow buttons to look through previously dialled numbers.

Press .
The number you select is dialled.
.
7