Accessories - General Instructions - KitchenAid 5K45SSC Use And Care Manual

General Information
®
KitchenAid Accessories are designed to assure long life. The accessory power shaft
and hub socket are of a square design, to eliminate any possibility of slipping during
the transmission of power to the accessory. The hub and shaft housing are tapered to
assure a snug fit, even after prolonged use and wear. KitchenAid
extra power unit to operate them; the power unit is built-in.
Accessory
Hub Socket
‡ Not part of
Stand Mixer.
To Attach
1. Turn speed control to "O".
2. Unplug Stand Mixer or disconnect
power.
3. Loosen accessory knob by turning it
counterclockwise. Remove accessory
hub cover.
4. Insert accessory shaft housing into
accessory hub, making certain that
accessory power shaft fits into square
accessory hub socket. It may be
necessary to rotate accessory back and
forth. When accessory is in proper
position, the pin on the accessory will
fit into the notch on the hub rim.
5. Tighten accessory knob by turning
clockwise until accessory is completely
secured to Stand Mixer.
Accessories
Accessory
Knob
General Instructions
18
Accessory
Power Shaft‡
Notch
Pin
Accessory Shaft
Housing
6. Plug into proper electrical outlet.
®
Accessories require no
Accessory
Housing