Audio Preset Recall - Kenwood KDC-BT945U Instruction Manual

Audio Preset Recall

Recalling the sound setup registered by
Preset Memory> (page
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio preset recall mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Detailed Setup"
3
Select the number to recall in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
4
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "YES".
"Recall Completed" is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The "User" of <Preset Equalizer curve Select> (page 39)
changed to the value which was recalled.
• The Equalizer curve is changed to the value which was
recalled by the selected source.
<Audio
44).
> >
"Preset" "Recall".
is
45
|
English