Station Preset Memory; Auto Memory Entry; Preset Tuning; Direct Access Tuning - Kenwood KDC-BT945U Instruction Manual

Station Preset Memory

Putting a station in the memory.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Preset Memory mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "List & Memory".
4
Select the number to put in the memory
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select a preset number.
Display Overview
"List & Memory"
"-1" Preset number 1.
"-2" Preset number 2.
"-6" Preset number 6.
Cancelling the Preset Memory mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.

Auto Memory Entry

Putting stations with good reception in the memory
automatically.
1
Select the radio band you wish to store in the
preset memory
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Auto Memory Entry mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings"
4
Open Auto Memory Entry
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "YES".
When 6 stations that can be received are put in the
memory, auto memory entry closes.
"Auto Memory".

Preset Tuning

Recalling the stations in the memory.
1
Select the radio band
2
Select a desired station in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "List & Memory"
Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4
Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
>
Preset number.
|
English
21