Kenwood KDC-BT945U Instruction Manual page 41

desired item is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• Select Main source by [SRC] button.
• Adjust the volume of Front channel by [VOL] knob.
• The Audio Control has no effect on sub source.
• There are following limitations when Dual Zone System
is enabled.
- There is no output from the subwoofer.
- "Fader", "Subwoofer Level" of
and DSP function are not available.
• The Bluetooth audio source can be set exclusively to the
front speaker. Set "2Zone Select" to "Rear".
<Audio Control> (page 38)
41
|
English