Installation - Kenwood KDC-316V Instruction Manual

Installation

I
Installation
Firewall or metal support
Accessory4
Self-tapping Accessory2
Metal mounting
screw
strap
(commercially
available)
NOTE
Make sure that the unit is installed securely in place. If the unit
is unstable, it may malfunction (for example, the sound may
skip).
I
Installing in Japanese-Made Cars
1
Refer to the section "Removing the hard rubber frame (P. 28)"
and then remove the hard rubber frame.
2
Align the holes in the unit (two locations on each side) with
the vehicle mounting bracket and secure the unit with the
accessory screws.
Bend the tabs of the
mounting sleeve
with a screwdriver or
similar utensil and
attach it in place. 2CAUTION
• During installation, do not use any screws except for those
provided. The use of different screws might result in damage
to the main unit.
• Damage may occur if a screwdriver or similar tool is used with
excessive force during the installations.
— 27 —
N
T
N
T/N
T
T: Toyota cars
N: Nissan cars Accessory5...for Nissan car
Accessory6 ...for Toyota car
8 mm
8mm
MAX.
MAX.
5
6
ø5mm
ø5mm