Presetting Disc Names (Dnps) - Kenwood KDC-316V Instruction Manual

1
Press the M.RDM button to switch magazine random play on
and off.
The RDM indicator lights up when magazine random play is
turned on. (KDC-316S/37MR/316V)
"MRDM ON" is displayed when magazine random play is
turned on. (KDC-416S)
The disc and track numbers will change over and over in the
display as the next track is being selected.
When the disc/track has been selected, play will begin.
The selected disc/track number blinks in the display as it is
being played.
To change the track being heard, press the ¢ button.
2
Another disc/track will be selected and played.
NOTE
• Magazine random play is canceled when you eject the disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.

Presetting Disc Names (DNPS)(

Store the names of discs to be displayed when played.
1
Play the disc whose name you want to preset.
NOTE
This function is not available for disc changers that do not feature
the Disc Name Preset function.
2
Enter the menu mode
Press the MENU button for at least one second. "MENU" is
displayed when the menu mode is entered.
3
Press the FM or AM button to select the display "NAME SET" .
Press either the 4 or ¢ button for at least two seconds to
4
enter the disc name preset mode.
The cursor blinks in the position where character input can be
made.
Function of the KDC-416S
Function of disc changers)
— 19 —
Press either the 4 or ¢ button to move the cursor to the
5
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
6
Press the FM or AM button to display the desired character.
Characters that can be displayed are as follows.
Alphabet (capital letters) : A~Z
Numerals/characters : 0~9 @ " ' ` % & * + - = , . / \ < > [ ]
7
Continue steps 5 and 6 until all the characters are chosen for
the name.
NOTE
You can enter up to 8 characters for each name.
8
Assigning Names
Press the MENU button.
The disc name is stored and the Presetting Disc Names mode
ends.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
NOTE
• The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
• If you want to change the name of a disc, repeat steps 1 to 4 to
display the name, and then repeat steps 5 and 6 to enter the
changes.