Pro-Form SPORT E2.0 User Manual page 9

7. While a second person holds the Console (23)
near the Upright (2), plug the Main Wire (73) into
the receptacle (C) on the Console. Tip: The wire
connector should slide in easily and snap
into place with an audible click. If it does not,
turn the connector and try again.
8. Insert the excess wire into the Upright (2).
Tip: Avoid pinching the Main Wire (73). Attach
the Console (23) to the Upright (2) with four
M4 x 16mm Screws (52); start all the Screws,
and then tighten them.
7
23
8
23
Avoid pinching
the Main Wire (73)
9
C
73
2
73
2
52