Wireless Network Projection - Epson PowerLite S39 User Manual

Wireless Network Projection

Downloaded from ManualsNet.com search engine
8. If necessary, select IP Settings and press Enter.
9. Select your IP Settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address as needed.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter. Or, press and hold the Num button
on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display.
11. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic: Wired Network Projection
You can project over a wireless network. To do this, you must set up your projector and computer for
wireless projection.
After setting up the projector as described here, install the network software from the included CD or
download the software and manuals as necessary.After setting up the projector as described here,
download the network software and manuals as necessary.
Note: If your projector is connected via a LAN cable (PowerLite X39/W39) to a network that includes a
wireless access point, you can connect to the projector wirelessly through the access point using the
Epson network software.
Installing the Wireless LAN Module
Using a QR Code to Connect a Mobile Device
Using Quick Wireless Connection (Windows)
Selecting Wireless Network Settings Manually
Selecting Wireless Network Settings in Windows
Selecting Wireless Network Settings on Mac
Setting Up Wireless Network Security
Parent topic: Using the Projector on a Network
61