Selecting The Connected Usb Source; Disconnecting A Usb Device Or Camera From The Projector - Epson PowerLite S39 User Manual

Selecting the Connected USB Source

Disconnecting a USB Device or Camera From the Projector

Downloaded from ManualsNet.com search engine
PowerLite W39
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
You can switch the projector's display to the source you connected to the USB-A port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB button on the remote control.
Parent topic: Connecting to External USB Devices
When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic: Connecting to External USB Devices
52