Table of Contents
Advertisement
Operations - The operator panel
3. The operator panel.
The operator panel on the right side of the :Anapurna M4F, gives you access to all the different
settings of the printer. It allows you to perform cleaning routines, to determine working proce-
dures and to enable safety and quality settings.
(1)
(2)
()
(4)
(5)
(6)
(7)
(8)
(9)
(10) ENTER
(11) Dir. Key
Stay ahead. With Agfa Global Services.
1
2
5
6
8
ON-LINE
:
When the LED (2) is on, the system is On-line and is ready to
print. Pressing the ESC () button will change the status to Off-
line, the LED will go out. If you send a job when the engine is in
the Off-line status, the LED will start blinking. the job waits until
you push the On-line button.
LED
:
Indicates On-Line or Off-Line status.
ESC
:
Use this button to CANCEL a print and to RETURN from a menu.
F1~F6
:
Function keys to access different menu's and settings.
TEST
:
Printing test, F1: Prime, F2: Vert. Alignment, F: Hor. Alignment.
PURGE
:
Similar functions to capping.
CALIB
:
Nozzle alignment, head gap.
CAPPING :
To position the head over the capping station.
PAUSE
:
To temporarily stop printing, press again to resume.
:
To save any settings you've changed in a menu.
:
Navigate through the different menu's.
(general overview)
4
7
9
10
19
11
:Anapurna M
- Operator Manual
4F
Advertisement
Table of Contents
