Page 1
Global Services North America Wilmington MA 01887 ANAPURNA M4F AGFA UV INKJET PRINTER SITE PREPARATION GUIDE Distribution: Customer Sales Service Dealer 03/17/10 Revision 5.0 Questions? Contact 800-879-2432 and ask for an Anapurna Specialist...
Global Services North America Wilmington MA 01887 Table of Contents Purpose: ---------------------------------------------------------------------------------------------------------------------------- 3 Scope: ------------------------------------------------------------------------------------------------------------------------------- 3 Major Project Milestones:----------------------------------------------------------------------------------------------------- 3 Dock door and hallway access-----------------------------------------------------------------------------------------------4 System Dimensions and Weight Crated:--------------------------------------------------------------------------------- 4 System Dimensions and Weight Uncrated:----------------------------------------------------------------------------- 4 Forklift Requirements: ---------------------------------------------------------------------------------------------------------4 Foot print with connections:------------------------------------------------------------------------------------------------- 5 Site Requirements Compressed Air Supply:------------------------------------------------------------------------------------------------------ 6...
Global Services North America Wilmington MA 01887 Purpose The purpose of this document is to assist the local service representative, who is responsible for configuring and installing the :Anapurna. This document will help to ensure the site will be ready and the customer is informed of their responsibilities.
It will be the customer’s responsibility to have the system moved to the location of where the Anapurna will be installed. An AGFA Service representative will be present to assist with moving the equipment. Once on its wheels the printer can be rolled to position, make sure to provide ramps as necessary to clear any thresholds.
Global Services North America Wilmington MA 01887 Foot Print and Working Area: Power and Air Connection Points: The power/air connection points are indicated in the diagram above with the letters – The power cable entry point lower chassis – near the rear left leveling foot. –...
Global Services North America Wilmington MA 01887 Engine Air Connection: Compressor: Engine Air Pressure: Engine Air Volume: Compressor Air Quality: Sample Adapter for the 6 mm air line to the printer. The 6 mm air line comes with the printer, approximate length is 1 meter. Recommended: Compressor, 60 G 5HP Compressor Single Stage Compressor, Motor Running HP 5, Free Air...
Global Services North America Wilmington MA 01887 Wasatch RIP The Wasatch SoftRip is provided for raster image processing of images. Install the Wasatch SoftRIP on a PC, which meets the following platform specifications. Minimum Recommended System requirements for Anapurna M4F CPU Type: Core 2 Duo, 3.06 GHz or faster 4 Gigabytes Ram Two Physical hard drives, 120 - 160 gigs size, 10K RPMs, one for the OS, one for the Rip...
3. The length of the power cord should be 9 Feet plus the distance to the outlet or power drop. The plug/receptacle should be a twist lock design in accordance with local electrical codes. Agfa Service will need to be able to disconnect power when required.
Page 9
Global Services North America Wilmington MA 01887 The Buck/Boost Transformer The Anapurna M4F UV Printers requires power in the 230 – 240 VAC range for the UV lamps to properly cure the ink. At 208 Volts the customer will have curing problems and the lamps will fail prematurely.
Global Services North America Wilmington MA 01887 Wiring Diagram to Boost Voltage (+32) for Single Phase Power: Questions? Contact 800-879-2432 and ask for an Anapurna Specialist AC Power Requirements Input Voltage = 208 V Output Voltage = 236 V This diagram illustrates how to connect a 1.5 KVA, 16/32 Volt buck boost transformer.
Page 11
Global Services North America Wilmington MA 01887 AC Power Requirements Sample Buck/Boost Transformer: This photo is showing a sample Buck Boost Transformer from Sola Hevi-Duty, it is a 1.5 KVA version, catalog # HS20F1.5A and it weights approximately 38 pounds or 17.2 Kgs. Questions? Contact 800-879-2432 and ask for an Anapurna Specialist...
Global Services North America Wilmington MA 01887 Site Readiness Check List Forklift Lateral fork movement capability. Proper lifting rating? Length of forks should be 60 inches (152.4cm) minimum Loading Dock If the customer does not have a loading dock, then the freight truck delivering the Anapurna will need a lift gate to lower the crate to the ground along with the forklift 3 - 5 HP, 60 - 80 gallon or better Capacity Compressor?
Suitable RIP computer and RIP software with the specifications as outlined in this document, page 7. Adequate space for the Agfa Anapurna, as described in this document, page 5 Transportation of the shipping crates to the installation location in the building.
40 Amp dedicated circuit. Buck/Boost transformer may be needed the 208 Y power to the 230 – 240 Volts range. Head Wipes Do not use cotton, poly or silk material on print heads, Agfa recommends: Company: Phone Number:...