Playable Disc Types; How To Read This Manual - JVC GVT0145-001B Instructions Manual

Playable Disc Types

DIGITAL VIDEO
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
• CD-R/RW: Recorded in the Audio CD, Video CD,
SVCD, MP3, WMA, and JPEG formats.
• DVD-R/-RW: Recorded in the DVD Video format.
In addition to the above discs, this system can play back
audio data recorded on CD Text, CD-G (CD Graphics), and
CD-Extra.
• The following discs cannot be played back:
DVD-RAM, DVD+R, DVD+RW, CD-I (CD-I Ready),
Photo CD, etc.
Playing back these discs will generate noise and damage
the speakers.
• In this manual, "file" and "track" are interchangeably used
for MP3/WMA/JPEG operations.
About color system
This System accommodates both NTSC and PAL system
and can play back discs recorded with either system.
To change the color system, see page 4.
Note on Region Code
DVD players and DVDs have their own Region Code
numbers. This System can play back only DVDs recorded
with the NTSC or PAL color system whose Region Code
numbers including "3" for Southeast Asia or "2" for Saudi
Arabia, Kuwait and the middle east. For your available
Region code, check the rear panel of your main unit.
EX.:
If a DVD with the improper Region Code numbers is loaded,
"REGION ERR" appears on the display and playback will
not start.
The System can play back the following digital audio
formats.
• LPCM (Linear PCM),
DTS (Digital Theater Systems), MPEG (MPEG
Multichannel), MLP (Meridian Lossless Packing)
2
(MX-JE5 only) (MX-JE5 only)
COMPACT
DIGITAL AUDIO
DIGITAL (Dolby Digital),
Caution for DualDisc playback
INFO
The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard. Therefore, the
use of Non-DVD side of a DualDisc on this product may not
be recommended.
IMPORTANT: Before playing a disc, make sure of
the following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays on the
TV screen.
• For disc playback, you can change the initial setting to
your preference. See "Setup Menu Operations" on
page 36.
If " " appears on the TV screen when you press a
button, the disc cannot accept the operation you have
tried to do, or data required for that operation is not
recorded on the disc.
• Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", "MLP Lossless", and the double-D
symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS 2.0+DIGITAL OUT" are trademarks of
Digital Theater Systems, Inc.

How to Read This Manual

• Button and control operations are explained as listed in the
table below.
• Some related tips and notes are explained later in the
sections "Learning More about This System" and
"Troubleshooting," but not in the same section
explaining the operations (
content has some information).
Indicates that you press the button briefly.
Indicates that you press the button briefly
and repeatedly until an option you want is
selected.
Indicates that you press one of the buttons.
Indicates that you press and hold the button
2
sec.
for a specified period.
The number inside the arrow indicates the
period of press (in the example, 2 seconds).
Indicates that you turn the control toward the
specified direction(s).
Indicates that this operation is only possible
Remote
ONLY
using the remote control.
Indicates that this operation is only possible
Main Unit
using the buttons and controls on the main
ONLY
unit.
indicates that the
INFO