Selecting The Sound Modes; Creating Your Own Sound Modes-User Mode - JVC GVT0145-001B Instructions Manual

Selecting the Sound Modes

You can select one of the preset Sound Modes.
Surround Modes
MULTI* DANCE HALL
OFF
* MX-JE5 only
Surround Modes*
MULTI (MX-
Outputs the same sound from the
JE5 only) surround speakers as the sound output
from the main speakers.
DANCE Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM Adds clarity and spreads the sound, as in
an outdoor stadium.
SEA (Sound Effect Amplifier) modes
ROCK Boosts low and high frequency. Good for
acoustic music.
POP Good for vocal music.
CLASSIC
Good for classical music.
User Modes
USER 1/2/3 Your individual mode stored in memory.
See the next column "Creating Your Own
Sound Modes—User Mode."
OFF No Sound Mode effect.
* Surround elements are added to the SEA elements to create
being-there feeling in your room.
Creating Your Own Sound
Modes—User Mode
You can create your own Sound Modes to make sounds suit
your taste. The changed settings can be stored as the USER 1,
USER 2 and USER 3 Modes.
1
Select one of the preset Sound Modes.
Surround Modes
SOUND
MODE
MULTI*
OFF
* MX-JE5 only
• If you want to add surround elements into your
Sound Mode, select one of the Surround Modes.
14
STADIUM ROCK
CLASSIC POP
SEA Modes
INFO
Main Unit
ONLY
DANCE HALL STADIUM ROCK
CLASSIC POP
SEA Modes
2
Enter into the SEA Control Mode.
• You can enter the SEA Control Mode only while the
Sound Mode name is shown on the display.
SET
/ DISPLAY
3
Adjust the SEA pattern.
1 Select one of the tone—BASS
or TRE (treble).
2 Adjust the level of the selected
tone.
• You can adjust the bass and
treble level from –3 to +3.
3 Repeat steps 1 and 2 to adjust
the level of the other tone.
4 Finish the SEA pattern setting.
4
Select one of the User Modes.
PRESET
5
Store the setting.
SET
/ DISPLAY
PRESET
TUNING
SET
/ DISPLAY