Sound Adjustments; Attenuating The Input Signal; Turning Off The Subwoofer; Reinforcing The Bass - JVC RX-5032VSL Instructions Manual

Sound Adjustments

Front panel
STANDBY
SURROUND
STANDBY/ON
DSP
SURROUND/DSP
OFF
DVD MULTI
D I G I T A L
PHONES
D I G I T A L
SPEAKERS
S U R R O U N D P R O L O G I C
ON/OFF
SUBWOOFER
OUT ON/OFF

Attenuating the Input Signal

When the input level of the analog source is too high, the
sound will be distorted. If this happens, you need to attenuate
the input signal level to prevent the distortion.
Once this has been adjusted, this receiver memorizes the
adjustment for each source.
Press and hold INPUT ATT on the front panel so that the
INPUT ATT indicator lights up on the display.
• Each time you press and hold the button, the Input
Attenuator mode turns on ("INPUT ATT ON") or off ("INPUT
NORMAL").
Note:
When selecting "DVD MULTI" (RX-6030VBK and RX-6032VSL only)
as the source, this effect does not work.

Turning Off the Subwoofer

When the subwoofer is set to "YES" (see page 15), you can
choose to turn off subwoofer output.
Press SUBWOOFER OUT ON/OFF on the front panel to
turn off the subwoofer.
"SUBWOOFER OFF" appears on the display for a while and
the indicator goes off.
S.WFR
The subwoofer sound comes out of the front speakers.
To turn on the subwoofer, press the button again.
18
INPUT ATT
RX–6030V AUDIO/VIDEO CONTROL RECEIVER
DIMMER
INPUT DIGITAL
DIGITAL AUTO SPK 1 2 ONE TOUCH OPERATION BASS BOOST INPUT ATT EON RDS SLEEP
ANALOG L C R PRO LOGIC DSP H.PHONE AUTO MUTING TUNED STEREO TA NEWS INFO VOLUME
LINEAR PCM S.WFR LFE
DIGITAL LS S RS
CH– INPUT ANALOG
INPUT ATT
DVD VCR TV SOUND CD TAPE/CDR FM AM
SOURCE NAME
FM/AM TUNING FM/AM RESET FM MODE MEMORY
SET
MULTI JOG
dial
Remote
NOT
Remote
NOT
Remote control
ADJUST
SETTING
EXIT
Notes:
• This button does not work when the subwoofer is set to "NO" (see
page 15). In this case, "NO SUBWOOFER" will appear on the
display for a while.
• You cannot turn off subwoofer output when the front speaker size is
set to "SMALL."
• When you change the subwoofer setting from "NO" to "YES,"
subwoofer output is automatically turned on.

Reinforcing the Bass

You can boost the bass level.
Once you have adjusted the bass boost level, this receiver
memorizes the adjustment for each source.
Press BASSBOOST on the remote control to select the
bass boost function.
• Each time you press the button, the bass boost function
turns on and off.
BASSBOOST ON
BASSBOOST OFF Select this to cancel it.
Note:
This function affects the front speakers sound only.
RX-6030V
RX-6032V
ONLY
BASSBOOST
6030J
REMOTE CONTROL RM-SRX
Select this to activate the bass boost
function.
The BASS BOOST indicator lights up on
the display.
The BASS BOOST indicator goes off.
RX-6030V
RX-6032V
ONLY