Using Dvd Multi Playback Mode (Rx-6030Vbk/Rx-6032Vsl Only); Activating Dvd Multi Playback Mode - JVC RX-5032VSL Instructions Manual

Using DVD MULTI Playback Mode
RX-6030VBK
This section is ONLY for
This receiver provides the DVD MULTI playback mode for
reproducing the analog discrete output mode of the DVD
player. Before playing a DVD, refer also to the manual supplied
with the DVD player.

Activating DVD MULTI Playback Mode

To use DVD MULTI playback mode, connect the DVD
player to the analog discrete input jacks on the rear of the
receiver (see page 9) and set the DVD player to the analog
discrete output mode.
On the front panel
STANDBY
SURROUND
STANDBY/ON
DSP
SURROUND/DSP
OFF
DVD
D I G I T A L
PHONES
D I G I T A L SPEAKERS SUBWOOFER OUT
P R O L O G I C
S U R R O U N D
ON/OFF ON/OFF
DVD MULTI
1
Press DVD MULTI.
Note:
When you select "DVD MULTI" as the source to play, Surround/
DSP mode is canceled, and SURROUND and DSP buttons do
not work.
2
Select the analog discrete output mode on
the DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
If you want to adjust the sound, see pages 19 to 21.
Once you have made adjustments, the receiver retains the
adjustments until you change them.
28
RX-6032VSL
and
RX–6030V AUDIO/VIDEO CONTROL RECEIVER
DIMMER
INPUT DIGITAL
INPUT ANALOG
INPUT ATT
VCR TV SOUND CD TAPE/CDR FM AM
SOURCE NAME
FM/AM TUNING FM/AM RESET FM MODE MEMORY
RX-6030V
RX-6032V
. From the remote control
1
4
7/P
10
TA/NEWS/INFO
1
Press DVD MULTI.
Note:
When you select "DVD MULTI" as the source to play, Surround/
DSP mode is canceled, and SURROUND and DSP buttons do
not work.
2
Select the analog discrete output mode on
the DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
If you want to adjust the sound, see pages 19 to 21.
Once you have made adjustments, the receiver retains the
adjustments until you change them.
ONLY
A/V CONTROL
RECEIVER
2 3
5 6
8 9
10
0
DISPLAY MODE
DVD MULTI